Object Enabler
Applicable to Non-ShipConstructor Users only!
If you open a ShipConstructor drawing in AutoCAD (that is, without using ShipConstructor), AutoCAD will not recognize any of the custom objects that were created by ShipConstructor. Object Enabler is a program you can install on computers running AutoCAD, butnot ShipConstructor, that enables AutoCAD to recognize custom objects created by ShipConstructor. This allows users with only AutoCAD to contribute to a ShipConstructor project.
Please download the version that corresponds with the ShipConstructor version that the files you are wanting to view were created in.
Do NOT run Object Enabler in conjunction with any full ShipConstructor program.
You do NOT require Object Enabler if you have ShipConstructor installed!
ShipConstructor 2012 Object Enabler
ShipConstructor 2012 Object Enabler 32 Bit (53.9MB/exe)
ShipConstructor 2012 Object Enabler 64 Bit (69.8MB/exe)
Compatible with ShipConstructor 2012.
AutoCAD 2010, AutoCAD 2011, or AutoCAD 2012 is required.
Note: Object Enabler is not compatible with AutoCAD LT.
Updated: December 1, 2011
Note: You must uninstall any previous SC 2008, SC 2009 or SC 2011 Object Enabler before you can install this version.
ShipConstructor 2011 Object Enabler
ShipConstructor 2011 Object Enabler 32 Bit R1.1 (52.7MB/exe)
ShipConstructor 2011 Object Enabler 64 Bit R1.1 (68.3MB/exe)
Compatible with ShipConstructor 2011 R1.1 and earlier versions of ShipConstructor 2011.
AutoCAD 2010 or AutoCAD 2011 is required.
Note: Object Enabler is not compatible with AutoCAD LT.
Updated: October 21, 2010
Note: You must uninstall any previous SC 2008 or SC 2009 Object Enabler before you can install this version.
ShipConstructor 2009 Object Enabler
ShipConstructor 2009 Object Enabler 32 Bit R1.1 (52.9MB/exe)
This is the 32 bit version. Compatible with ShipConstructor 2009 R1.1 and earlier versions of ShipConstructor 2009.
Windows 2000, XP, Vista or Windows 7, and AutoCAD 2007, AutoCAD 2008 or AutoCAD 2009.
Note: Object Enabler is not compatible with AutoCAD LT.
Updated: May 11, 2010
Note: You must uninstall any previous SC 2008 Object Enabler before you can install this version.
ShipConstructor 2009 Object Enabler 64 Bit R1.1 (41.3MB/exe)
This is the 64 bit version. Compatible with ShipConstructor 2009 R1.1 and earlier versions of ShipConstructor 2009.
64 versions of Windows Vista or Windows 7, and 64 bit versions of AutoCAD 2009.
Note: Object Enabler is not compatible with AutoCAD LT.
Updated: May 11, 2010
ShipConstructor 2008 Object Enabler
ShipConstructor 2008 Object Enabler R4.3.1 (46MB/exe)
Compatible with ShipConstructor 2008 R4.4.1 and previous versions of ShipConstructor 2008.
Requires Windows 2000 or XP, and AutoCAD 2007, AutoCAD 2008 or AutoCAD 2009.
Note: Object Enabler is not compatible with AutoCAD LT.
Updated: July 20, 2009
Note: You must uninstall any previous SC 2008 Object Enabler before you can install this version.
Previous Object Enabler Versions
Other Versions
ShipConstructor2005 Object Enabler (7.9MB/exe)
Compatible with ShipConstructor 2005.
Requires Windows 2000 or XP, and AutoCAD
Posted: June 30, 2006
ShipConstructor2004 Object Enabler (9.5MB/exe)
Requires Windows NT, 2000, or XP, and
Posted: November 4, 2004
ShipConstructor2002 Object Enabler (1.2MB/exe)
Requires Windows NT, 2000, or XP, and
Posted: July 17, 2003
ShipConstructor2001 Object Enabler (1.1MB/exe)
Requires Windows NT, 2000, or XP, and
Posted: November 6, 2002
ShipConstructor2000 Object Enabler (812KB/exe)
Requires Windows NT, 2000, or XP, and
Posted: November 6, 2002
Object Enabler Installation
After downloading, run the download and follow the instructions in the "install.htm" file.
©
ShipConstructor Software Inc. All Rights Reserved. ShipConstructor and DDROM are registered trademarks of ShipConstructor Software Inc.
Database Driven Relational Object Model is a trademark of ShipConstructor Software Inc.