Please read the following knowledgebase articles if you have updated from pre-R3.1.

ShipConstructor 2008 R3.1.3 - Fixed Issues: 2

Issue ID Issue Type Description
 Hull   Subtotal: 2 
12913 Issue Hull - Surface - Surface may exibit missing triangle shells in a row close to a surface edge.
11192 Issue Hull - Surface - The surface trim does not display properly in shade mode on particular surfaces


ShipConstructor 2008 R3.1.2 - Fixed Issues: 5

Issue ID Issue Type Description
 Distributed Systems   Subtotal: 1 
12873 Issue Production - Arrangement - Update - Update of Arrangement drawings causing Fatal Error
 Penetrations   Subtotal: 1 
12808 Issue Production - Arrangement & Assembly - Update - Penetration - Updating a production drawing with penetrations and selecting AutoCAD geometry
 Shared   Subtotal: 1 
12452 Issue Production - Export to DWG - Labeling - Wipeout and label leader does not export to dwg properly
 Structure   Subtotal: 2 
12752 Issue Manager - Structure - Standard Parts - Standard part types can fail to get included in the "Standard Part Types" hierarchy
12035 Issue Production - Profile Plots - Inverse Bend Lines were generated incorrectly in specific case


ShipConstructor 2008 R3.1.1 - Fixed Issues: 2

Issue ID Issue Type Description
 Distributed Systems   Subtotal: 1 
12697 Issue Production - Arrangement / Assembly - BOM - Pipe and HVAC Spools and Assemblies collected in BOMs will not get labeled
 Project Split & Merge   Subtotal: 1 
12705 Issue Project Split & Merge - When synchronizing assemblies, do not delete 'predefined' assemblies. they may exist with different guids in each project.


ShipConstructor 2008 R3.1 - Fixed Issues: 53
New Features: 6
Improvements: 6
Fixed Issues: 41

Issue ID Issue Type Description
 Distributed Systems   Subtotal: 8 
12243 Issue Equipment - Equipment Library - Equipment library should should support stock names up to 255 chars.
10847 Improvement Pipe - NavisWorks - Not all required fields exposed in Navisworks Properties
10789 Issue Distributed Systems - Modeling - When re-creating model drawings, objects should go on logical layers
10549 Issue Distributed Systems - Modeling - Activate from UCS command, change X axis to go along item
10020 Issue Distributed Systems - Modeling - LIST command does not refresh properties, potentially listing incorrect values
9962 Issue Distributed Systems - Modeling - Using Copyclip causes a fatal save error
9933 Issue Manager - Pipe Catalog - Naming Conventions - When Material Grade is in the naming convention, the generated name is not always correct
9823 New Feature Distributed Systems - Modeling - Show flow direction
 Equipment   Subtotal: 1 
12209 Issue Equipment - Library - Using the Apply button and then making further changes causes a database error when you save those changes
 NC-Pyros   Subtotal: 3 
11751 Issue NC-Pyros - Open shapes are created and show warnings but the original objects are closed polylines that include large radius arcs
11581 Issue NC-Pyros - Backplot gives incorrect results in specific case
11580 Issue NC-Pyros - Only first instance of a specfic number keyword is replaced when it exists multiple times in contoller code file
 Penetrations   Subtotal: 1 
10082 New Feature Penetrations - Standards - New watertight plate component standard
 Pipe   Subtotal: 1 
12034 Issue Pipe - Connections - Pipe connections don't use angular tolerance and always create connections.
 Shared   Subtotal: 8 
12370 Issue Production - Penetrations - Opening a production drawing with pens can crash
12330 Issue Report - Generating Report on faceplate part with "Not required" user defined attribute will fail
12284 Issue Report - Adding field to one section will make all fields in other section disappeared
11469 Issue Licensing - Unselecting all licenses for report deregisters the SC client licenses unexpectedly
11309 Issue Shared - Drawings - Trying to save a drawing while NOT connected to a project cause a fatal error
10876 New Feature Report - Structure - Report the flange/web direction of a profile
9666 Issue Production - BOM - Labeling - Only one item from each accessory package has a label generated for it.
9264 Improvement Product Hierarchy - Should be able to move Product Hierarchy window off the AutoCAD window
 Structure   Subtotal: 31 
12372 Issue Split and Merge - Merge failed System.Exception: Error updating project datasets while resolving spool name conflict.
12365 Issue Structure Modeling - The area for curved plate which has green on it are smaller than expected
11955 Issue Object Enabler - Structure - Old corrugated plate parts with no expanded geometry cause ObjectEnabler to crash
11859 Issue Structure - Parts - Plates - Marklines - Stiffener markline sometimes extends past the edge of the plate when partial marked
11804 Issue Structure - Utilities - Replicate - Replicate plate with stiffeners attached loses identical relationship with replicated part
11793 Issue Production - Structure - Profile Plot - "Show Log" does not display the log
11771 Issue Structure - Parts - Plate cutouts - Trimming on profile that has cutouts in plates breaks the relation between plates
11742 Issue Production - Structure - Profile Plot - BOM will not be updated if Show Log option is off.
11738 Issue Production - Structure - Plate Nest - "Export Nest Parts" will change file name if the part contains invalid character
11659 Issue Structure - Parts - Curved Plate - Memory leaks during mark group intersects and interference checking
11654 Issue Manager - Structure - Bevel Standard - Cancel and close button does not work
11579 Issue Production - Structure - Plate Nesting - Export - Unable to export to NC-Pyros file with thickness in naming convention in an imperial system
11570 Issue Structure - Parts - Twisted Stiffeners - Improve the modeling of twisted stiffeners made from structural pipe and rect tube stocks
11543 Improvement Structure - Parts - Profile - Add check for invalid cutouts in profile parts
11500 Issue Production - Structure - Assembly - Assembly Drawings are not "Out-Of-Date" when bevel text size is changed
11450 Issue Manager - Structure - "User Defined Attributes" windows have two "In Use" columns
11439 Issue Manager - Structure - User Attributes - Update database error after add value to user attributes then delete the stock
11368 Issue Structure - Parts - Plates - Marklines - If markline text is not on the largest segment of a multi-segment markline then break line for text will not work
11287 Issue Structure - Planar Group - Creating new planar group leaves the NURBSCurves original layer in the new drawing
11201 Issue Manager - Structure - Bevel Standards - Clicking OK when we have duplicate bevels causes recently created bevels to be removed
11200 Issue Production - Structure - Plate Nest - BOM shows incorrect value for Area, Volume, Weight for plate with green
10867 Issue Production - MATES - Exported marklines need to be exported as polylines joined with the mark symbols
10790 Issue Structure - Parts - Profile - Length can be reported incorrectly for parts made from Structural Pipe or Round Bar with an angled trim.
10594 Improvement Production - Structure - Assembly & Arrangement wizard - The assembly names should have their descriptions appended to them as in the Product Hierarchy Dialog
10542 Issue Structure - Utilities - Check Planar Group/Unit/Project - Add check for parts that are invalid
8789 New Feature Structure - Parts & Stocks - Support Required User Attributes
7328 New Feature Production - Structure - Approval Drawing - Allow option for user to select text size of xref name
7138 Improvement Production - Structure - Profile Plot - Don't re-generate dimensions when stiffeners are removed from a plot
7104 New Feature Structure - Standard Part - Command to convert a standard part to a regular part
6396 Issue Structure - Parts - Green - Calculation of area and weight of parts may or may not use green
6170 Improvement Structure - Utilities - Quality Matrix - Option to set the precision


Links to previous TechNotes