ShipConstructor 2008 Lock Update Required

ShipConstructor 2008 R4.0.1 requires 1200 level lock licenses. You must contact your local sales representative to update your locks before you can use this release.


ShipConstructor 2008 R4.0.1 - Fixed Issues: 86

New Features: 20
Improvements: 9
Fixed Issues: 57

Issue ID Issue Type Description
 Administrator   Subtotal: 1 
11480 Issue Administrator - Update Database - databases with a numerical name or prefix will right align in the 'Update Project Databases' window
 Distributed Systems   Subtotal: 10 
12683 Issue Distributed Systems - Spool Manager - Aborting during defining the spools are causing database errors and doesn't allow to save the drawing in some cases
11643 Minor Improvement Distributed Systems - Modeling - When splitting a spool highlight the parts that can be selected.
11052 Issue Production - Spool - Dimensions associated with the OFFSET hatch need to be on the same layer as the offset
10845 New Feature Distributed Systems - Modeling - Expose "Mirror about centerline" command for System Model Drawings
10800 New Feature Distributed Systems - Modeling - Allow the user to control all drawing settings from the command line
10314 New Feature Production - Spool - Update - Automatically update CG point
9746 New Feature Distributed Systems - Modeling - "Connects to" feature does not work with remote drawings
9676 New Feature Production - Keywords - Add Assembly keywords to Arrangement drawings
8949 New Feature Distributed Systems - Spool Manager - Allow picking of spools assembly by structural part
4490 New Feature Distributed Systems - Spool - User Defined Attributes - User-defined attributes on spools
 Equipment   Subtotal: 3 
11553 Issue Manager - Equipment - Library - Dragging Equipment Standards does not allow simultaneous scrolling
6804 Issue Manager - Equipment - Equipment items should be allowed to have their weight values set to zero if they are non-insertable
5510 New Feature Equipment - Modeling - Add support for Equipment/HVAC Connections
 HVAC   Subtotal: 2 
6013 Issue HVAC - Stock Editor - Allowable connections editor, delete AC & Type at same time shows error message
4717 Issue HVAC - Modeling - Breaking a Connected Duct does not always maintain correct connections
 Hull   Subtotal: 14 
11943 Issue Hull - Import - Surface - Import resolution is calculated from the untrimmed surface and typically results in a surface mesh which is too dense
11866 Issue Hull - Forming Template - Adding Edge Margin to templates may cause AutoCAD to freeze.
11479 Issue Hull - Import/Export - Importing a Rhino/IGES file can result in an underlying surface mesh that is unnessisarily large.
11256 Issue Hull - Markline - Projections and trimming using curves could fail within one mesh shell (i.e. deck surfaces)
11100 Minor Improvement Hull - Export - Planar Group Creation - When creating a Planar Group with multiple NURBS curves, ask user to combine NURBS curve
11011 Issue Hull - Surface - Single curved surfaces do not allow display of insoline densities other than none and all.
11009 Issue Hull - Surface - Sweep one rail surfaces are lofted incorrectly.
10950 Issue Hull - Plate Expansion - Expanded Plates should have no isolines by default
10942 Issue Hull - Plate Expansion - Neutral Axis reported Strain values are inaccurate.
10925 New Feature Hull - Plate Expansion - An Expansion option to not remove old expanded geometry
10917 Issue Hull - Markline - Some marklines are not trimmed correctly.
9280 Issue Hull - Surface - Extract Outer Trim in Edit Marklines dialog does not untrim the surface when Delete option is selected
9167 Issue Hull - Surface - IsoLines set to All is not showing all of the mesh lines
9154 Issue Hull - Surface - Untrimming a surface does not create the correct "Previous Outer Trim Loop" markline on the newly untrimmed surface
 NC-Pyros   Subtotal: 1 
12132 Issue NC-Pyros - Generating Complete Path crashes when needed to erase a short segment that is the last segment in the shape
 Penetrations   Subtotal: 3 
12371 Issue Penetrations - Watertight doublers don't always create properly
11794 Issue Penetrations - Modeling - Error: DBX CAS 4 when opening a dwg file in NavisWorks that contains a Penetration
10084 New Feature Penetrations - Creation - Penetrations should be on seperate layers
 Pipe   Subtotal: 4 
12304 Issue Pipe - Modeling - Elbow insertion in intersection mode does not insert elbow at true intersection point
11546 Issue Pipe - Modeling - "Olets" should get measured only up until they meet the saddle header part
10301 Issue Manager - Pipe - Catalog - Branch definitions required end 1 match stock size.
7453 New Feature Production - BOM - Spool - Add Spool location and coord tables
 Project Split & Merge   Subtotal: 1 
11470 Issue Project Split & Merge - Engine - Merge creates construction lines and planar group plane construction lines that share transforms
 Shared   Subtotal: 10 
12725 Issue Production - Profile Plot - Stiffeners are not grouped correctly and sometimes cutouts are missing.
12353 Issue Report - The existing fields will be duplicated when adding a new field
12322 Issue Report - The "Description" value for a User Defined Attribute does not save
12033 Issue Navigator - Generating Report will cause the Navigator contents not refreshed when change project
11968 Issue Production - Label - Leader Distribution Lines - Transferring a leader distribution line to itself causes a crash or hang
11824 Issue Manager - BOM - Decimal field props edit format shows error "input string was not in a correct format" when regional settings number is not 123,456,789.00
11597 Issue Manager - Structure - The warning message asking users run "Generate Names" for alerted thickness stock should mention Nests
11196 Issue Production - BOM - Deferred part attributes should be created in BOMs as fields containing the text "Deferred"
10086 Issue Report/BOM - Elbow weight, wet weight, fluid weight should take cutback into account
6286 New Feature Manager - General - Generate Usage Log for Manufacturers
 Structure   Subtotal: 37 
12687 New Feature Weld Management - Catalog - The catalog portion of Weld Management provides the ability to customize weld types, create and edit weld standards, and assign those standards using the Weld Schedule.
12603 Issue Manager - Import/Export - All Modules or Structure - Importing fails with an error at the Weld Type.
12159 Issue Manager - Structure - Standard Plate - Can't add more than one flange using the same flange standard
12152 Minor Improvement Licenses - Increment version of ShipConstructor Licenses
12091 Issue Structure - Parts - Profile - Lengthen\Shorten field when creating editing a profile part rounds the entered value to 2 decimal places
12068 Issue Production - Plate Nest - Nest Manager uses the old icon in its title bar
11981 Minor Improvement Production - Plate Nest - New nest keywords (Plate Stock, Nest Stock, Nest)
11933 Issue Manager - Structure - Standard Parts - "Edit Standard Part" window is not activated when create a new standard part
11930 Issue Manager - Structure - "Edit Standard Part" can be opened multiple times and it causes problem
11753 Issue Production - Plate Nest - Nest status will be lost after creation, then Undo plus Redo
11657 Issue Manager - Structure - Stock catalog - Clicking the Usage log button does not show log file
11656 Issue Manager - Structure - Stock Catalog - Usage Log fails if the stock is used as a Penetration Component
11653 Issue Manager - Structure - Unhelpful error message when unassigning in-use bevel code in Bevel Standards window
11536 Minor Improvement Structure - Utilities - Display Options - Allow option to not display Markline Text
11429 Issue Structure - Utilities - Boundary Diagnostic - Default values of size of circle and extend length
11358 Minor Improvement Structure - Parts - Plank - Command to delete all planks in a collection
11167 Issue Production - MATES - Running scmatesout command on a circle shape of plate will cause a crash
11022 Issue Structure - Profile Plots - The user is prompted with an invalid profile plots message, which defaults on Yes to delete the drawings
10750 Issue Production - Profile Nest - Nest priority is not used when nesting
10742 New Feature Structure - Standard Part - Better options while inserting standard parts
10648 Minor Improvement Production - Profile Plots - The Select Stiffeners window displayed when inserting profile plots should list assemblies first and then parts
10574 Issue Production - Profile Plot - Endcut and Green labels can be placed on top of each other
10560 Issue Production - Profile Nest - Error occurs when profile nesting a part which was plate nested
10303 Minor Improvement Production - Plate Nest - Check - Add checking of part geometry during checking the nest
10237 Issue Production - Profile Plots - Inverse Bend lines are not generated unless the keyword is also in the profile plot template
10207 Issue Structure - Planks - During creation some planks don't end up as identicals when they should be
10184 Issue Production - Profile Plot - Green is not considered when finding the correct scale for a profile plot
10026 Minor Improvement Production - Profile Plots - Add an option to not display green graphically when creating profile plots.
9898 New Feature Production - Approval - Extract components does not connect mark symbols to markline
9552 New Feature Production - Profile Plots - Re-scale plots when parts in them have changed in length
9004 New Feature Manager - Structure - Endcut Definition - Preview should have orthogonal view directions in Right Click
6574 New Feature Production - Plate Nest - Remnants - Capability of making remnants from remnant
6562 Issue Production - Profile Plot - Geometrically identical profiles with either cutouts or trims are not grouped together in the same plots
6066 Issue Manager - Structure - Profile Cutout Shapes - Creating a cutout for a Rect Tube with the profile showing results in a message that prevents you from saving until you delete the profile
5820 New Feature Production - Profile Plots - Profile Plot scale should use the best scale of length vs height
5564 Issue Production - Profile Plots - Renaming and copying profile plot templates using windows explorer causes ill effects
3480 New Feature Structure - Parts - Relationship - Related structure parts should create another relationship between associated parts when mirrored