Important! Please read the following carefully before running R4.1.4:

ShipConstructor R4.1.4 allows users to solve a serious issue with plate nests that contain remnants. For full instructions on how to use R4.1.4 to solve this problem, please read the following KnowledgeBase Article: http://www.shipconstructor.com/kb/questions.php?questionid=1892.
This update also contains a fixed SQL update script from R3.1 to R4 allowing users who have not updated to R4 yet to avoid this problem when they update their databases.


ShipConstructor 2008 R4.1.4 - Fixed Issues: 1

New Features: 0
Improvements: 0
Fixed Issues: 1

Issue ID Issue Type Description
 Structure   Subtotal: 1 
13567 Issue Production - Plate Nest - Nest Stock Plate Moves Unexpectedly Upon Drawing Open


ShipConstructor 2008 R4.1.3 - Fixed Issues: 4

New Features: 0
Improvements: 0
Fixed Issues: 4

Issue ID Issue Type Description
 Equipment   Subtotal: 1 
13459 Issue Production - Assembly Drawing - Update drawing that contained equipment parts that were move out of the assembly show up every second update
 Project Split & Merge   Subtotal: 1 
13447 Issue Project Split & Merge - An error can occur during a refresh or merge if there is a spool naming conflict
 Shared   Subtotal: 1 
13150 Issue Production - Approval - Save As Bound Approval Causes crash
 Structure   Subtotal: 1 
13386 Issue Production - Profile Nest - Only one twisted stiffener part per stock will be shown in the part tree


ShipConstructor 2008 R4.1.1 - Fixed Issues: 46

New Features: 9
Improvements: 4
Fixed Issues: 33

Issue ID Issue Type Description
 Distributed Systems   Subtotal: 4 
12920 Issue Production - Export to DWG - XREFs contained in XREFed drawings will be attempted to bind those but shouldn't
12712 Issue Manager - BOM - Inconsistencies in BOM Definitions grid after the addition of location tables.
12623 New Feature Manager - Distributed Systems - End Treatment - Have option to allow End Treatment names to use Secondary Size in place of Nominal Size
10314 New Feature Production - Spool - Update - Automatically update CG point
 Equipment   Subtotal: 2 
12643 Issue Production - NWDOUT - Running NWDOUT cause a Fatal Error when drawing contains an equipment part
12396 Issue Manager - Equipment Library - Duplicate equipment class names cause an exception when creating new equipment classes.
 Hull   Subtotal: 3 
11528 Issue Hull - Locations - Decimal naming convention does not apply to added rows when initial value is same as initial position
11437 Issue Hull - Locations - "To" Location/Spacing doesn't get converted properly when in an imperial project.
7275 New Feature Hull - Projection - Add projection options
 NC-Pyros   Subtotal: 1 
11583 Issue NC-Pyros - Write NCY contains bad layer name for No Process TEXT
 Pipe   Subtotal: 3 
12902 Issue Manager - Pipe - 180 degree elbows have incorrect total length
12691 New Feature Manager - Pipe - Catalog - Flatsheets
1526 New Feature Pipe - Hangers - Ability to create/edit/delete pipe hangers, produce production drawings, and create reports for hangers
 Project Split & Merge   Subtotal: 6 
12819 Issue Project Split & Merge - Merge/Refresh files are missing their planar group model drawings
12459 New Feature Project Split & Merge - Merge/Refresh - If it is detected that parts belong to an assembly that is not in the same unit that the part was created in, have an option to Auto fix parts and Continue with Merge/Refresh
11230 Issue Project Split &Merge - Engine - Merge or refresh failure when merging an arrangement that references a deleted source
11229 Issue Project Split &Merge - Engine - Parts added by spool disappear from arrangement drawing after merge or refresh
11227 Issue Project Split & Merge- Engine - Merge or refresh failure when remote controlled arrangement or assembly drawing is merged that references deleted locally controlled part
11124 Issue Project Split & Merge - Engine - Penetrations not handled when merging arrangement and assembly drawings
 Shared   Subtotal: 7 
13288 Issue Report - Setting or changing the 'Include Label' value of Grouping Summary Fields causes an unhandled exception
12778 Issue Report - Parts only get added to Pipe System reports if they have not been spooled
12774 Issue Report - "Distributed Systems" tree fails to load a large part of its hierarchy
12475 Issue Product Hierarchy - Hiding/Unhiding levels of the Product Hierarchy can hide the wrong parts
12319 Issue Report - Trailing '0' for columns that have a set "Decimal Places" value
11416 Issue FlyThrough - Support for NavisWorks 2009 all types (Review/Manage/Simulate)
10911 Issue Shared - Utilities - MLink - Using Mlink when the current layer is locked crashes ShipConstructor
 Structure   Subtotal: 17 
13125 Issue Structure - Parts - Profile - Editing a Stiffener that creates cutouts in multiple related plates can be slow
13005 Issue Structure - Parts - Plate - Markline - Crash when updating associated marklines
12970 Issue Manager - Import/Export - Import is failing validation on Fabricated Stiffeners.
12556 Issue Production - Profile Plot - Opening Profile plot options shows FATAL ERROR on specific computers
12536 New Feature Structure - Parts - Plate - Profile Cutouts - Have User option in Project Settings to only create profile cutouts in plates parts from profiles in the same unit
12505 Issue Structure - Parts - Faceplates - Closed faceplates can report the incorrect length in specific circumstances
12437 Issue Production - Plate Nest - Remnants - No boundary checking when you create new remnants.
12074 Issue Production - Assembly - "WBLOCK" in some Assembly Drawing causes fatal errors
12072 Issue Production - Assembly - Assembly Drawing is not "Show Out Of Date" when a part was deleted
11661 Issue Structure - Parts - Plates - Changing Plate Thickness used in name doesn't update related parts' names
11617 Issue Structure - Parts - Corrugated Plates - The Properties does not generate updated name based on stock selection
11360 New Feature Structure - Parts - Plank - Allow a selection of plank parts in a collection to create a new collection
11325 Issue Structure - Assembly - Assembly Drawings are not "Out-Of-Date" when text size of planks' piecemark is modified
8765 Minor Improvement Structure - Parts - Plank - Capability to add and remove inner cuts to a plank collection
8442 Minor Improvement Manager - Structure - Add usage log to all structure dialogs that have a usage column
7690 Minor Improvement Structure - Parts - Plate - Profile Cutouts - Display the drawing name in the Cutout Manager of Stiffeners creating cutouts in a plate parts
7611 Minor Improvement Structure - Parts - Planks - Able to change the stock of a Plank Collection
 Weld Management   Subtotal: 3 
12796 New Feature Weld Management - Modeling - Ability to create/edit/delete welds, produce production drawings and report on weld lengths
12472 Issue Manager - Weld Management - Weld Schedules - The words in the Weld Standard disappears when the Used box is clicked
12470 Issue Manager - Weld Management - Weld Standard - Exiting without saving after adding keyword from a drawing does not cancel changes